Vibromera forum

Balanset-1 => Discussion about Balanset-1 => Topic started by: Andrew on July 15, 2018, 03:29:45 PM

Title: balancing machine for Pelton runner
Post by: Andrew on July 15, 2018, 03:29:45 PM
Greetings,

We need balancing machine for Pelton runner. All necessary information’s are enclosed in the drawing.

Those are the cases of smallest and biggest runners that we need to balance.

Please, can you confirm that we can use your equipment for balancing such parts and send us the quotation?

Best regards.
Title: Re: balancing machine for Pelton runner
Post by: Andrew on July 15, 2018, 03:48:09 PM
Greetings!
Yes, our equipment can be used for balancing your Pelton runners.
Our balancing system used influence coefficients method, so is possible to balance rotors of any weights and size.
But our balancer is a field balancer, so you can balance your parts in their own bearings with own drive motor. Our equipment is just vibration measuring system and balancing software. There are not any mechanical part in our balancing equipment. You can made any simple balancing stand.


Best wishes
Andrew Shelkovenko